Diagnose and configure modules for the Ford Focus 2 and C-Max I.
By connecting to your Ford Focus 2 or C-Max using an ELM327 or ELS27 adapter, you can work with the following modules on the CAN-bus:
Engine Control Module: View module information, read and clear fault codes, reboot the module, and reset long-term fuel trim (KAM)* for:
ESU-411/418 (1.8L 125HP / 2.0L 145HP)
SIM28/29 (1.4L 80HP / 1.6L 100HP/115HP)
ESU-121/131 (1.8L 120HP / 2.0L 145HP).
Instrument Cluster: View module information, read and clear fault codes, configure the module, reboot the module, change odometer units, and perform mileage correction*.
-ABS Module: View module information, read and clear fault codes, configure the module, reboot the module, reset DDS calibration, and perform brake bleeding*.
-Comfort Module: View module information, read and clear fault codes, configure the module*, and reboot the module.
-Restraints Control Module (Airbag): View module information, read and clear fault codes, configure the module, reboot the module, and reset crash data*.
- Transmission Control Module: View module information, read and clear fault codes, and reset KAM*.
-Climate Control Module: View module information, read and clear fault codes.
-Audio Module: View module information, read and clear fault codes, and retrieve radio codes (for M-series units)*.
*-These features are available only in the full version.
To unlock the application's full potential and access more vehicle modules, some minor hardware modifications to your ELM327 adapter are required.
Set the adapter's switch as described here:
Http://forffclub.narod.ru/index/0-2
You can purchase an ELS27 adapter at: https://els27.ru/. When using the app with ELS27USB, set the speed to 38400 baud. For ELS27BT, use 2,000,000 baud via the ELS27 Baudrate utility.
